BH GSO ISO/TR 14799-2:2016
ISO/TR 14799-2:2005
Bahraini Standard
Current Edition
·
Approved on
08 February 2016
Comparison of worldwide escalator and moving walk safety standards --Part 2: Abbreviated comparison and comments
BH GSO ISO/TR 14799-2:2016 Files
English
112 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
BH GSO ISO/TR 14799-2:2016 Scope
This Technical Report consists of a comparison of the requirements of selected topics as covered by the following
world-wide safety standards (excluding local deviations):
a) Europe (CEN) – EN 115; Safety rules for the construction and installation of escalators and passenger
conveyors (Edition January 1995 and amendment A1: 1998);
b) USA - ASME A 17.1-1996; Safety Code for Elevators and Escalators
NOTE The requirements for Canada (B 44) are generally the same as for the USA. Any differences are stated in the text.
c) Australia - AS 1735 parts 5 and 6 for escalators and moving walks (Edition 1996);
d) Japan – Safety requirements mainly comprised of Building Standard Law Enforcement Order (BSLJ-EO),
Notifications of Ministry of Construction (MOC-N, No. 1110-1981) and draft of Japan Elevator Association
Standard (JEAS);
e) Russia – PUBEE 10-77-94, Regulations for the installation and safe use of escalators (Edition 1995);
f) Korea –The Elevator Inspection Standards, KATS 2001-414 Edition according to the Korea Elevator Law
4482, both cover the safety requirements on the escalator and moving walk.
It should be noted that in addition to the above listed standards and other regulations, escalators and moving walks
may be required to conform to the requirements of other standards as appropriate. Where ISO/TC 178/WG 5 was
aware of these standards they are mentioned in the bibliography
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025
Gulf Standard
Ladders - Part 3: Marking and user instructions
GSO ISO 22705-3:2026
ISO 22705-3:2024
Gulf Standard
Springs — Measurement and test parameters — Part 3: Cold formed cylindrical helical torsion springs
GSO ISO 14732:2026
ISO 14732:2025
Gulf Standard
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
GSO EN 1514-4:2026
EN 1514-4:1997
Gulf Standard
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges