BH GSO ISO 13857:2016
ISO 13857:2008
Bahraini Standard
Current Edition
·
Approved on
10 February 2016
Safety of machinery -- Safety distances to prevent hazard zones being reached by upper and lower limbs
BH GSO ISO 13857:2016 Files
English
17 Pages
Current Edition
Reference Language
BHD
45.28
BH GSO ISO 13857:2016 Scope
This International Standard establishes values for safety distances in both industrial and non-industrial environments to prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also gives information about distances to impede free access by the lower limbs (see 4.3).
This International Standard covers people of 14 years and older (the 5th percentile stature of 14 year olds is approximately 1400 mm). In addition, for upper limbs only, it provides information for children older than 3 years (5th percentile stature of 3 year olds is approximately 900 mm) where reaching through openings needs to be addressed.
NOTE 1 Data for preventing lower limb access for children is not considered.
The distances apply when adequate safety can be achieved by distance alone. Because safety distances depend on size, there will be some people of extreme dimensions who will be able to reach hazard zones even when the requirements of this International Standard are complied with.
NOTE 2 These safety distances will not provide sufficient protection against certain hazards, for example, radiation and emission of substances. For such hazards, additional or other measures need to be taken.
The clauses of the International Standard covering lower limbs apply when access by the upper limbs is not foreseeable according to the risk assessment.
The safety distances are intended to protect those persons trying to reach hazard zones under the conditions specified (see 4.1.1).
NOTE 3 This International Standard is not intended to provide measures against reaching a hazard zone by climbing over.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025
Gulf Standard
Ladders - Part 3: Marking and user instructions
GSO ISO 5393:2026
ISO 5393:2017
Gulf Standard
Rotary tools for threaded fasteners — Performance test method
GSO ISO 11681-2:2026
ISO 11681-2:2022
Gulf Standard
Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service
GSO ISO 8741:2026
ISO 8741:2025
Gulf Standard
Fasteners — Reverse-taper grooved pins — Half-length progressive grooves