GSO OIML R111:2003
OIML R 111:1994
Gulf Technical Regulation
Current Edition
·
Approved on
15 October 2003
WEIGHTS OF CLASSES E1, E2, F1, F2, M1, M2, M3
GSO OIML R111:2003 Files
No files for this standard are available in the store currently.
GSO OIML R111:2003 Scope
1.1 This standard contains the principal physical characteristics and metrological requirements for weights which are used
- for the verification of weighing instruments;
- for the verification of weights of a lower class of accuracy;
- with weighing instruments.
The nominal values of mass of the weights covered by this standard range from 1 milligram (mg) to 50 kilograms (kg).
1.2 This standard applies to weights in classes of accuracy as follows: E1, E2, F1, F2, M1, M2, M3.
1.2.1 Weights used for the verification of weighing instruments
The classes of accuracy of the weights used for the verification of weighing instruments shall be specified in the appropriate International Recommendations relating to these instruments.
1.2.2 Weights used for the verification of weights of a lower class of accuracy
E1 - Weights intended to ensure traceability (see GSO 1651/2002 paragraph A.3) between national mass standards (with values derived from the International Prototype of the kilogram) and weights of class E2 and lower.
Class E1 weights or sets of weights shall always be accompanied by a calibration certificate (see 12.2).
E2 - Weights intended to be used for the initial verification of weights of class F1.
Class E2 weights or sets of weights shall always be accompanied by a calibration certificate; they may be used as class E1 weights if they comply with the requirements for surface roughness and magnetic susceptibility of class E1 weights and if their calibration certificate gives the appropriate data (specified in 12.2).
F1 - Weights intended to be used for the initial verification of weights of class F2.
F2 - Weights intended to be used for the initial verification of weights of class M1 and possible M2.
_________________________
(1) E: Exceptional, F: Fine, M: Medium.
M1 - Weights intended to be used for the initial verification of weights of class M2.
M2 - Weights intended to be used for the initial verification of weights of class M3.
1.2.3 Minimum accuracy class of weights used with weighing instruments
The accuracy classes of weights used with weighing instruments shall be chosen in accordance with the requirements of GSO 1698 / 2005 “Nonautomatic weighing instruments”.
F1, E2 - Weights intended to be used with weighing instruments of accuracy of class I.
F2 - Weights intended to be used for important commercial transactions (e.g. gold and precious stones) on weighing instruments of accuracy class II.
M1 - Weights intended to be used with weighing instruments of accuracy class II.
M2 - Weights intended to be used in normal commercial transactions and on weighing instruments of accuracy class III.
M3 - Weights intended to be used on weighing instruments of accuracy classes III and IIII.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages


BH GSO OIML R87:2022
OIML R87:2016
Bahraini Standard
Quantity of product in prepackages



GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages


BH GSO OIML R79:2022
OIML R79:2015
Bahraini Standard
Labeling requirements for prepackages



Recently Published from Metrology Sector
GSO ISO 362-1:2025
ISO 362-1:2022
Gulf Standard
Acoustics — Engineering method for measurement of noise emitted by accelerating road vehicles — Part 1: M and N categories


GSO ISO/TR 16610-32:2025
ISO/TR 16610-32:2023
Gulf Standard
Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters


GSO ISO 15368:2025
ISO 15368:2021
Gulf Standard
Optics and photonics — Measurement of reflectance of plane s


GSO ISO 5725-4:2025
ISO 5725-4:2020
Gulf Standard
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method

