ISO 16957:2016

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  16 يونيو 2016

Measurement of apparent thermal conductivity of wet porous building materials by a periodic method

استخلاص الحرارة. العزل الحراري
* تغطي هذه المجموعة المواصفات ذات الاستخدام العام * العزل الحراري في المباني، انظر 91.120.10

ملفات الوثيقة ISO 16957:2016

الإنجليزية 20 صفحات
الإصدار الحالي
50.32 BHD

مجال الوثيقة ISO 16957:2016

ISO 16957:2016 describes a method of measuring the thermal conductivity (diffusivity) of a wet porous building material and a method of evaluating the measurement uncertainty.

While ISO 10051 is the current International Standard, based on a steady-state method, ISO 16957:2016 proposes a method that makes use of a non-steady-state method which uses a small temperature change with a short period as an input. Along with the measurement, an evaluation of the measurement uncertainty is described, which makes possible a simple and practical measuring method.

ISO 16957:2016 intends to measure the apparent (effective) thermal conductivity, including latent heat transfer caused by vapour movement. The situation in which moisture and/or air movement occur due to convection or gravity is excluded. The application of ISO 16957:2016 to high moisture content is excluded so that the gravity effect can be neglected. ISO 16957:2016 can be applied to a porous material heavier than about 100 kg/m3, in which radiative heat transfer can be neglected.

It specifies the following:

a) a non-steady-state method of measuring thermal conductivity;

b) an approximation formula for the measurement uncertainty caused by moisture movement and nonuniform moisture distribution (and, thus, a determination of the measuring conditions that satisfy the upper limit of measurement uncertainty);

c) an estimate of the heat transfer caused by moisture (vapour) movement.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 23774:2023
 
مواصفة قياسية دولية
Pulps — Kraft liquor — Determination of total, active and effective alkali using potentiometric titration
ISO 233-3:2023
 
مواصفة قياسية دولية
Information and documentation — Transliteration of Arabic characters into Latin characters — Part 3: Persian language — Transliteration
ISO 23772:2023
 
مواصفة قياسية دولية
Pulps — Kraft liquor — Determination of residual alkali using potentiometric titration
ISO/IEC 30134-7:2023
 
مواصفة قياسية دولية
Information technology — Data centres key performance indicators — Part 7: Cooling efficiency ratio (CER)