ISO 17201-1:2018

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  28 نوفمبر 2018

Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement

الهندسة العسكرية. الشئون العسكرية. الأسلحة
* الملابس العسكرية، انظر 61.020
المرافق الرياضية
* تشمل برك السباحة، الملاعب الرياضية، ميادين السباق والجري ، الخ
الضجيج المنبعث من الآلات والمعدات
* تُستخدم المواصفات الواردة في هذا القسم أيضاً مع أقسام أخرى و/أو تقسيمات فرعية وفقاً لموضوعاتها

ملفات الوثيقة ISO 17201-1:2018

الإنجليزية 39 صفحات
الإصدار الحالي
71.5 BHD

مجال الوثيقة ISO 17201-1:2018

This document specifies a method to determine the acoustic source energy of the muzzle blast for calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent. It is applicable at distances where peak pressures less than 1 kPa (equivalent to a peak sound pressure level of 154 dB) are observed. The source energy, directivity of the source and their spectral structure determined by this procedure can be used as input data to sound propagation programmes, enabling the prediction of shooting noise in the neighbourhood of shooting ranges. Additionally, the data can be used to compare sound emission from different types of guns or different types of ammunition used with the same gun.

This document is applicable to guns used in civil shooting ranges but it can also be applied to military guns. It is not applicable to the assessment of hearing damage or sound levels in the non-linear region.

Suppressors and silencers are not taken into consideration in this document.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 21978:2023
 
مواصفة قياسية دولية
Air to water heat pumps — Testing and rating at part load conditions and calculation of seasonal coefficient of performance for space heating
ISO 12643-2:2023
 
مواصفة قياسية دولية
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems
ISO 4266-2:2023
 
مواصفة قياسية دولية
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
ISO 12643-3:2023
 
مواصفة قياسية دولية
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems