ISO 20074:2019

مواصفة قياسية دولية   PUBLISHED

Petroleum and natural gas industry — Pipeline transportation systems — Geological hazard risk management for onshore pipeline


This document specifies requirements and gives recommendations on the management of geohazard risks during the pipeline design, construction and operational periods.

This document is applicable to all operators and pipelines (existing and proposed/under construction).

This document applies to onshore gathering and transmission pipelines used in the petroleum and natural gas industries.

NOTE This document is not applicable to piping and pipelines within well-defined plants and facilities, such as pump or compressor stations, processing facilities or refineries. It is assumed that the facility site as a whole will be subject to a separate geohazard assessment to evaluate applicable natural and man-made hazards. Nevertheless, this document can provide useful guidance for assessing the geohazard threat to facilities, including the pipelines within the facility.

This document is applicable to all reasonable and credible natural hazards induced by natural forces and hazards induced by human activity that manifest similarly to natural hazards collectively referred to as "geological hazards" or "geohazards", or through industry as attributed to "natural forces". Geohazards covered by this document include, but are not limited to (not given in order of significance):

— mass wasting processes, including landslides, lateral spreads, rockfalls, debris flows, avalanches, and similar processes whether naturally occurring or anthropogenic;

— land subsidence and/or sinkhole formation, whether naturally occurring such as from dissolution of salt or carbonate rock formations (karst formation) or human caused, such as from underground mining or withdrawal of subsurface fluids such as groundwater and oil and gas;

— seismic hazards, such as ground shaking, fault rupture, liquefaction, flow failures and lateral spreading or associated secondary effects, such as seismically triggered landslides;

— volcanic hazards, such as lahars, pyroclastic flows, lava flows, dam break, and volcanically induced seismicity (excluding ashfall), where such hazards can be reasonably predicted;

— hydrologic processes, such as flooding, vertical scour of river bottoms, channel migration and bank erosion, channel avulsion, rapid lake drainage;

— permafrost/periglacial processes and geothermal effects, such as thermal degradation, frost heave or thaw settlement, thermal erosion, thermokarst;

— surface (overland), trench backfill, or earthwork fill erosion;

— expansion or collapsing processes caused by expansive and collapsible soils, such as glaciomarine clays, collapsible loess, etc.

This document is not applicable to atmospheric/environmental effects, such as the following:

— high winds induced from hurricanes and tornadoes and similar storms, except where such events are reasonably predictable and will induce geohazards such as landslides, erosion, etc.;

— lightning;

— forest or brush fires;

— ashfall from volcanic eruptions.

Furthermore, this document is not applicable to cascading events, where one remote event leads to a chain of events that eventually induces a geohazard near the pipeline. It is only applicable to geohazards that directly affect the pipeline or RoW.

30 يوليو 2019



الأكثر مبيعاً

GSO 9:2013
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
BH GSO 9:2015
GSO 9:2013 
لائحة فنية بحرينية
بطاقات المواد الغذائية المعبأة
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 150-2:2013
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية

اعتمدت مؤخراً

ISO 16189:2021
مواصفة قياسية دولية
Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine dimethylformamide in footwear materials
ISO 9241-20:2021
مواصفة قياسية دولية
Ergonomics of human-system interaction — Part 20: An ergonomic approach to accessibility within the ISO 9241 series
ISO/IEC 27013:2021
مواصفة قياسية دولية
Information security, cybersecurity and privacy protection — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
ISO 6801:2021
مواصفة قياسية دولية
Rubber and plastics hoses — Determination of volumetric expansion