ISO 19085-15:2021

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  14 أكتوبر 2021

Woodworking machines — Safety — Part 15: Presses

ألات النجارة
* سلسلة المناشير والمناشير ذات الفرشاة، انظر 65.060.80
السلامة في استخدام الآلات
* تشمل هذه المجموعة فقط مواصفات السلامة بصفة عامة

ملفات الوثيقة ISO 19085-15:2021

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 19085-15:2021

This document gives the safety requirements and measures for stationary manually loaded and unloaded:

—    cold presses;

—    hot presses;

—    bending presses;

—    edge/face gluing presses;

—    membrane presses;

—    embossing presses;

where the pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, hereinafter referred to as "machines".

It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.

NOTE      For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.

It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:

a) device for hot gluing;

b) device for high-frequency gluing;

c) device for high-frequency shaping;

d) automatic work-piece loading and unloading system;

e) intermediate additional platens;

f) work-piece extractor;

g) work-piece clamping pressure beam;

h) split moveable platens.

The machines are designed to process work-pieces consisting of:

1)    solid wood;

2)    materials with similar characteristics to wood (see ISO 19085‑1:2017, 3.2);

3)    honeycomb board.

This document does not deal with any hazards related to:

—    specific devices that differ from the list above;

—    hot fluid heating systems internal to the machine other than electrical;

—    any hot fluid heating systems external to the machine;

—    operation of taking intermediate platens out and in again;

—    the combination of a single machine being used with any other machine (as part of a line).

It is not applicable to:

—    frame presses;

—    membrane presses where the pressing force is applied by vacuum only;

—    presses for producing chipboard, fibreboard, OSB;

—    machines intended for use in potentially explosive atmosphere;

—    machines manufactured before the date of its publication as an international standard.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 15500-13:2023
 
مواصفة قياسية دولية
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13: Pressure relief device (PRD)
ISO/TS 11007-2:2023
 
مواصفة قياسية دولية
Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 2: Method with water wash-out
ISO 13583-2:2023
 
مواصفة قياسية دولية
Centrifugally cast steel and alloy products — Part 2: Heat-resistant materials
ISO 7784-1:2023
 
مواصفة قياسية دولية
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen