ISO 21646:2022

International Standard   Current Edition · Approved on 12 May 2022

Solid recovered fuels — Sample preparation

ISO 21646:2022 Files

English 61 Pages
Current Edition
93.21 BHD

ISO 21646:2022 Scope

This document specifies methods for sample preparation to ensure representativeness of the samples throughout the preparation procedures to produce general analysis samples. Suitable test portions can be taken from the laboratory or general analysis samples and used for analysis according to the specific requirements defined in the corresponding analytical procedures.

This document specifies the correct sample preparation sequence to be applied to:

a) the composite sample, in order to produce a laboratory sample (taking into account large pieces of solid recovered fuel);

b) each sub-sampling step throughout the testing programme;

c) the laboratory sample, in order to obtain suitable test portions;

d) ensure the representativeness of the test portions that have been taken according to the sample preparation plan, prior to physical analysis, chemical analysis or both (e.g. extractions, digestion, analytical determinations).

The methods specified in this document can be used for sample preparation, for example, when the samples are to be tested for bulk density, biomass content determination, mechanical durability, particle size distribution, moisture content, ash content, ash melting behaviour, calorific value, chemical composition, impurities and self-heating properties. The methods are not intended to be applied to the very large samples required for the testing of bridging properties.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 37303:2025
 
International Standard
Compliance management systems — Guidance for competence management
ISO 37302:2025
 
International Standard
Compliance management systems — Guidance for the evaluation of effectiveness
ISO 21740:2025
 
International Standard
Space systems — Launch window estimation and collision avoidance
ISO 7899-3:2025
 
International Standard
Water quality — Enumeration of intestinal enterococci — Part 3: Most probable number method