ISO 5597:2018

International Standard   Current Edition · Approved on 25 April 2018

Hydraulic fluid power — Cylinders — Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications

ISO 5597:2018 Files

English 16 Pages
Current Edition
46.26 BHD

ISO 5597:2018 Scope

ISO 5597:2018 establishes the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder rod and piston seal housings for reciprocating applications in the following range of dimensions:

- for cylinders of 16 mm to 500 mm;

- for rods of 6 mm to 450 mm.

An additional range of seal housings is detailed in this document to meet the reduced envelope requirements of the 160 bar (16 MPa)[1] compact series of ISO 6020‑2; these smaller section seals require stricter piston rod and cylinder bore tolerances. The range of dimensions is as follows:

- cylinders of 25 mm to 200 mm;

- rods of 12 mm to 140 mm.

ISO 5597:2018 does not give details of seal design, since the manner of construction of seals varies with each manufacturer. The design and material of the seal and any incorporated anti-extrusion components are determined by conditions such as temperature and pressure.

ISO 5597:2018 only applies to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics.

[1] 1 bar = 100 kPa = 105 Pa = 0,1 MPa; 1 Pa = 1 N/m2.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 19970:2025
 
International Standard
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Metering of gas as fuel on LNG carriers during cargo transfer operations
ISO 3664:2025
 
International Standard
Graphic technology and photography — Viewing conditions
ISO/IEC 14496-10:2025
 
International Standard
Information technology — Coding of audio-visual objects — Part 10: Advanced video coding
ISO 19361:2025
 
International Standard
Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting