ISO 20766-16:2022

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٤ يناير ٢٠٢٢

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 16: Injectors and gas mixing device/fuel rail

ملفات الوثيقة ISO 20766-16:2022

الإنجليزية 5 صفحات
الإصدار الحالي
BHD 19.69

مجال الوثيقة ISO 20766-16:2022

This document specifies general requirements for the injectors and gas mixing device/fuel rail, components of liquefied petroleum gas fuel, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking.

This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following:

a) fuel containers;

b) stationary gas engines;

c) container mounting hardware;

d) electronic fuel management;

e) refuelling receptacles.

It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests.

All references to pressure in this document are considered gauge pressures unless otherwise specified.

This document applies to devices which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 2055-1:2015
 
لائحة فنية خليجية
منتجات الحلال – الجزء 1: الاشتراطات العامة للأغذية الحلال
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 21611:2026
 
مواصفة قياسية دولية
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 21815-4:2026
 
مواصفة قياسية دولية
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 4576:2026
 
مواصفة قياسية دولية
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
 
مواصفة قياسية دولية
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C