ISO 20766-25:2022

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  04 يناير 2022

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 25: Gas connections

ملفات الوثيقة ISO 20766-25:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 20766-25:2022

This document specifies general requirements and definitions of the gas connection component of liquefied petroleum gas fuel, it is intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking.

This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following:

a) fuel containers;

b) stationary gas engines;

c) container mounting hardware;

d) electronic fuel management;

e) refuelling receptacles.

It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests.

All references to pressure in this document are considered gauge pressures unless otherwise specified.

This document applies to devices which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 5754:2023
 
مواصفة قياسية دولية
Sintered metal materials, excluding hardmetals — Unnotched impact test piece
ISO/IEC 39794-2:2023
 
مواصفة قياسية دولية
Information technology — Extensible biometric data interchange formats — Part 2: Finger minutiae data
ISO 18400-301:2023
 
مواصفة قياسية دولية
Soil quality — Sampling — Part 301: Sampling and on site semi-quantitative determinations of volatile organic compounds in field investigations
ISO 24187:2023
 
مواصفة قياسية دولية
Principles for the analysis of microplastics present in the environment