ISO 12217-2:2022

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  16 ديسمبر 2022

Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m

السفن الصغيرة
* تشمل أنظمة السفن الصغيرة ومكوناتها وسبل إنقاذ الأحياء * وسائل الإنقاذ الشخصي (سترة النجاة)، انظر 13.340.10

ملفات الوثيقة ISO 12217-2:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 12217-2:2022

This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.

The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum load.

This document is principally applicable to boats propelled primarily by sail (even if fitted with an auxiliary engine) of 6 m up to and including 24 m hull length. However, it can also be applied to boats less than 6 m if they are habitable multihulls or can be applied if they do not attain the desired design category specified in ISO 122173 and they are decked and have quick-draining recesses which comply with ISO 11812.

In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation.

This document excludes:

    inflatable and rigid-inflatable boats covered by the ISO 6185 series, except for references made in the ISO 6185 series to specific clauses of the ISO 12217 series;

    gondolas and pedalos;

    surfboards including sailing surfboards; and

    hydrofoils and foil stabilized boats when not operating in the displacement mode.

NOTE       Displacement mode means that the boat is only supported by hydrostatic forces.

It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 3262-13:2023
 
مواصفة قياسية دولية
Extenders — Specifications and methods of test — Part 13: Natural quartz (ground)
ISO 17386:2023
 
مواصفة قياسية دولية
Intelligent transport systems — Manoeuvring aids for low-speed operation (MALSO) — Performance requirements and test procedures
ISO 22932-4:2023
 
مواصفة قياسية دولية
Mining — Vocabulary — Part 4: Prospecting and exploration
ISO/TS 32003:2023
 
مواصفة قياسية دولية
Document management — Portable Document Format — Adding support of AES-GCM in PDF 2.0