ISO 12217-3:2022

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ 16 ديسمبر 2022 ·

Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m

السفن الصغيرة
* تشمل أنظمة السفن الصغيرة ومكوناتها وسبل إنقاذ الأحياء * وسائل الإنقاذ الشخصي (سترة النجاة)، انظر 13.340.10

ملفات الوثيقة ISO 12217-3:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 12217-3:2022

This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft susceptible to swamping are also encompassed.

The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (C or D) appropriate to its design and maximum load.

This document is applicable to boats of hull length less than 6 m, whether propelled by human or mechanical power, except habitable sailing multihulls. Boats of hull length less than 6 m which are fitted with a full deck and quick-draining cockpit(s) complying with ISO 11812 can alternatively be assessed using ISO 122171 or ISO 122172 (for non-sailing and sailing boats, respectively), in which case higher design categories can be assigned.

In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation.

This document excludes:

    inflatable and rigid-inflatable boats covered by the ISO 6185 series, except for references made in the ISO 6185 series to specific clauses of the ISO 12217 series;

    personal watercraft covered by ISO 13590 and other similar powered craft;

    aquatic toys;

    canoes and kayaks;

    gondolas and pedalos;

    sailing surfboards;

    surfboards, including powered surfboards;

    hydrofoils, foil stabilized boats and hovercraft when not operating in the displacement mode; and

    submersibles.

NOTE       Displacement mode means that the boat is only supported by hydrostatic forces.

It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 9111:2024
 
مواصفة قياسية دولية
Water reuse in urban areas — Guidelines for benefit evaluation of reclaimed water use
ISO 13426-2:2024
 
مواصفة قياسية دولية
Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites
ISO 24566-2:2024
 
مواصفة قياسية دولية
Drinking water, wastewater and stormwater systems and services — Adaptation of water services to climate change impacts — Part 2: Stormwater services
ISO 16646:2024
 
مواصفة قياسية دولية
Fusion installations — Criteria for the design and operation of confinement and ventilation systems of tritium fusion facilities and fusion fuel handling facilities