ISO 8217:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٣٠ مايو ٢٠٢٤

Products from petroleum, synthetic and renewable sources — Fuels (class F) — Specifications of marine fuels

ملفات الوثيقة ISO 8217:2024

الإنجليزية 41 صفحات
الإصدار الحالي
80.45 BHD

مجال الوثيقة ISO 8217:2024

This document in its entirety defines the general requirements and specifications for fuels used in marine diesel engines and boilers, prior to onboard fuel handling (storage, settling, centrifuging, filtration, heating) before use.

For the purposes of this document, the term “fuels” comprises of the following:

    hydrocarbons from petroleum crude oil, oil sands and shale oil;

    synthetic hydrocarbons, renewable hydrocarbons or hydrocarbons from recycled sources, with molecular structures that are indistinguishable from petroleum hydrocarbons;

    fatty acid methyl ester (FAME), where permitted as specified in this document;

    blends of any of the above, where permitted as specified in this document.

The general requirements and specifications for fuels in this document can also be applied to fuels used in stationary diesel engines of the same or similar type as those used for marine purposes.

This document specifies seven categories of distillate fuels, one of which is for diesel engines used for emergency purposes. It also specifies four categories of residual fuels for sulfur content at or below 0,50 % by mass, five categories of residual fuels containing FAME and five categories of residual fuels for sulfur content exceeding 0,50 % by mass.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 15964:2025
 
مواصفة قياسية دولية
Detection and avoidance systems for uncrewed aircraft systems
ISO 5175-3:2025
 
مواصفة قياسية دولية
Gas welding equipment — Safety devices — Part 3: Decomposition blockers for low-pressure acetylene
ISO 29461-4:2025
 
مواصفة قياسية دولية
Air intake filter systems for rotary machinery — Part 4: Test methods for static filter systems in coastal and offshore environments
ISO 3451-5:2025
 
مواصفة قياسية دولية
Plastics — Determination of ash — Part 5: Poly(vinyl chloride)