ISO 5623:2022

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٦ سبتمبر ٢٠٢٢

Plastics — Joining of thermoplastic moulded components — Specification for quality levels for imperfections

ملفات الوثيقة ISO 5623:2022

الإنجليزية 17 صفحات
الإصدار الحالي
44.72 BHD

مجال الوثيقة ISO 5623:2022

This document specifies quality levels for imperfections in joints in thermoplastic moulded components due to the joining process.

This document does not describe imperfections that can be generated either during service or present before joining, such as poor fit up. The correct preparation before joining is described in the relevant thermal joining process specification (TJPS), as defined in ISO 23512.

Three quality levels are specified in order to permit application for a wide range of the following joining processes:

a) ultrasonic welding;

b) ultrasonic spot welding;

c) infrared welding;

d) hot gas convection welding;

e) vibration welding;

f) spin welding;

g) laser welding;

h) hot plate welding; and

i) heat staking: hot air; electrical, infrared and ultrasonic.

They are designated by symbols B, C and D, where B is the most stringent. The quality levels refer to production quality and not to the fitness for purpose of the manufactured product.

NOTE      Standards on joining of plastic pipes, fittings, valves and/or auxiliary equipment, and the assessment of the properties of the resulting joints are developed and maintained by ISO/TC 138.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO/IEC 22460-1:2025
 
مواصفة قياسية دولية
Cards and security devices for personal identification — ISO UAS licence and drone or UAS security module — Part 1: Physical characteristics and basic data sets for UAS licence
ISO 5068-1:2025
 
مواصفة قياسية دولية
Brown coals and lignites — Determination of moisture — Part 1: Indirect gravimetric method for total moisture
ISO 17581:2025
 
مواصفة قياسية دولية
Rubber- or plastics-coated fabrics — Determination of water absorption resistance
ISO 22504:2025
 
مواصفة قياسية دولية
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Onshore and offshore pipelines pig traps design requirements