ISO 19880-9:2024

International Standard   Current Edition · Approved on 16 July 2024

Gaseous hydrogen — Fuelling stations — Part 9: Sampling for fuel quality analysis

ISO 19880-9:2024 Files

English 39 Pages
Current Edition
82.91 BHD

ISO 19880-9:2024 Scope

This document outlines requirements for sampling from hydrogen fuelling stations for samples taken at the dispenser. The document defines the best practice for sampling at the nozzle of a hydrogen fuelling station as part of the fuelling station acceptance testing, and ongoing operation.

Further, the document describes the minimum safety requirements for sampling.

This document is targeted for the sampling from the hydrogen fuelling station dispenser. Many of the generic requirements within this document are applicable to sampling at other locations within the hydrogen fuelling station, which can be carried out for hydrogen quality assurance, see ISO 19880-8, however, further specific requirements that can be necessary for safe sampling are not addressed in this document.

The intention of sampling hydrogen is to enable analysis against the requirements of ISO 14687, and by analytical methods validated by protocols described in ISO 21087.

This document supersedes, and is an extension to, the guidance published in ISO 19880-1:2020, Annex K.

NOTE            Analytical methods are divided into on-line analyses and off-line analyses. On-line analysis allows for real time analysis at hydrogen stations and is not covered in this document.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 37303:2025
 
International Standard
Compliance management systems — Guidance for competence management
ISO 37302:2025
 
International Standard
Compliance management systems — Guidance for the evaluation of effectiveness
ISO 21740:2025
 
International Standard
Space systems — Launch window estimation and collision avoidance
ISO 7899-3:2025
 
International Standard
Water quality — Enumeration of intestinal enterococci — Part 3: Most probable number method