ISO 18563-1:2022

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  30 أغسطس 2022

Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments

الاختبارات غير الضارة (غير المتلفة )
* تشمل معدات القياس، الاستخدام الصناعي لأشعة اكس وأشعة جاما، أجهزة كشف التسرب الإشعاعي ، الخ * الاختبارات غير الضارة للمعادن، انظر 77.040.20 * الاختبارات غير الضارة لوصلات اللحام، انظر 25.160.40 * أفلام التصوير الشعا

ملفات الوثيقة ISO 18563-1:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 18563-1:2022

This document specifies the functional characteristics of multi-channel ultrasonic phased array instruments used for array probes and provides methods for their measurement and verification.

This document is also applicable to ultrasonic phased array instruments in automated systems; but other tests can be needed to ensure satisfactory performance. When the phased array instrument is a part of an automated system, the acceptance criteria can be modified by agreement between the parties involved.

This document also can partly be applicable to FMC instruments and TFM instruments.

This document gives the extent of the verification and defines acceptance criteria within a frequency range of 0,5 MHz to 10 MHz.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 21978:2023
 
مواصفة قياسية دولية
Air to water heat pumps — Testing and rating at part load conditions and calculation of seasonal coefficient of performance for space heating
ISO 12643-2:2023
 
مواصفة قياسية دولية
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems
ISO 4266-2:2023
 
مواصفة قياسية دولية
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
ISO 12643-3:2023
 
مواصفة قياسية دولية
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems