ISO 21606:2022
مواصفة قياسية دولية
الإصدار الحالي
·
اعتمدت بتاريخ
٠١ أغسطس ٢٠٢٢
Dentistry — Elastomeric auxiliaries for use in orthodontics
ملفات الوثيقة ISO 21606:2022
الإنجليزية
8 صفحات
الإصدار الحالي
26.68 BHD
مجال الوثيقة ISO 21606:2022
This document specifies the requirements and their test methods applicable to all elastomeric auxiliaries used for orthodontics both inside and outside the mouth, in conjunction with fixed and removable appliances.
الأكثر مبيعاً
GSO 150-2:2013
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني :
فترات الصلاحية الاختيارية
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
BH GSO 150-2:2015
GSO 150-2:2013
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني :
فترات الصلاحية الاختيارية
![BH Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_bh_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
BH GSO 2055-1:2016
GSO 2055-1:2015
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
![BH Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_bh_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2055-1:2015
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
اعتمدت مؤخراً
ISO/ASTM TS 52949:2025
مواصفة قياسية دولية
Additive manufacturing of metals — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-EB equipment
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
ISO/TS 7815-2:2025
مواصفة قياسية دولية
Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 2: Specification of the secure vehicle interface
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
ISO 3506-4:2025
مواصفة قياسية دولية
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws with specified grades and hardness classes
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
ISO 5700:2025
مواصفة قياسية دولية
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)