ISO 19882:2025

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٢ فبراير ٢٠٢٥

Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers

ملفات الوثيقة ISO 19882:2025

الإنجليزية 31 صفحات
الإصدار الحالي
BHD 71.17

مجال الوثيقة ISO 19882:2025

This document specifies minimum requirements for pressure relief devices intended for use on hydrogen fuelled vehicle fuel containers that comply with ISO 19881, IEC 62282-4-101, CSA/ANSI HGV 2, EC79/EU406, SAE J2579, UN ECE R134, or the UN GTR No. 13.

The applicability of this document is limited to thermally activated pressure relief devices installed on fuel containers containing gaseous hydrogen according to ISO 14687 for fuel cell and internal combustion land vehicles. This document specifies requirements for thermally activated pressure relief devices acceptable for use on-board the following types of land vehicles:

—          light-duty vehicles;

—          heavy-duty vehicles;

—          industrial powered trucks, such as forklifts and other material handling vehicles.

Requirements for other types of land vehicles such as rail, off-road, etc., can be derived with due consideration of appropriate service conditions.

This document does not apply to reseating, resealing, or pressure-activated devices.

Pressure relief devices can be of any design or manufacturing method that meets the requirements of this document.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 2055-1:2015
 
لائحة فنية خليجية
منتجات الحلال – الجزء 1: الاشتراطات العامة للأغذية الحلال
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 21611:2026
 
مواصفة قياسية دولية
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 21815-4:2026
 
مواصفة قياسية دولية
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 4576:2026
 
مواصفة قياسية دولية
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
 
مواصفة قياسية دولية
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C