ISO 21474-3:2024

International Standard   Current Edition · Approved on 15 November 2024

In vitro diagnostic medical devices — Multiplex molecular testing for nucleic acids — Part 3: Interpretation and reports

ISO 21474-3:2024 Files

English 14 Pages
Current Edition
45.84 BHD

ISO 21474-3:2024 Scope

This document gives the general requirements for interpretation and reporting of multiplex molecular tests which simultaneously identify two or more nucleic acid target sequences of interest. This document is applicable to all multiplex methods used for examination using in vitro diagnostic (IVD) medical devices and laboratory developed tests (LDTs). It provides information for both qualitative and quantitative detection of nucleic acid target sequences.

This document is intended as guidance for multiplex examinations that detect or quantify human nucleic acid target sequences and microbial pathogen nucleic acid target sequences from human clinical specimens.

This document is applicable to any molecular IVD examination performed by medical laboratories. It is also intended to be used by laboratory customers, IVD developers and manufacturers, biobanks, institutions, commercial organizations performing biomedical research, and regulatory authorities. This document is not applicable to metagenomic massive parallel sequencing (MPS), but it is applicable to multiplex molecular methods including 16S sequencing.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 20589:2025
 
International Standard
Glass in building — Determination of the emissivity
ISO 11265:2025
 
International Standard
Environmental solid matrices — Determination of the specific electrical conductivity
ISO 11465:2025
 
International Standard
Sludge and solid environmental matrices — Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis
ISO 9350:2025
 
International Standard
Corrosion of metals and alloys — Testing method of corrosion resistance for hafnium at high temperature and pressure