ISO 16032:2024

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ 23 فبراير 2024 ·

Acoustics — Measurement of sound pressure level from service equipment or activities in buildings — Engineering method

السمعيات في المباني. عزل الصوت
* قياس الصوتيات وخفض الضوضاء بصفة عامة، انظر 17.140.01 * مواد عزل الصوت ، انظر 91.100.60
الضجيج المنبعث من الآلات والمعدات
* تُستخدم المواصفات الواردة في هذا القسم أيضاً مع أقسام أخرى و/أو تقسيمات فرعية وفقاً لموضوعاتها

ملفات الوثيقة ISO 16032:2024

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 16032:2024

This document specifies an engineering method for the measurement of sound pressure levels in rooms from service equipment installed in the building.

This document covers specifically measurements of sound from sanitary installations, mechanical ventilation, heating and cooling service equipment, lifts, rubbish chutes, heating devices, blowers, pumps and other auxiliary service equipment, and motor driven car park doors. It can also be applied to measurements of sounds from other types of equipment or activities within the building, e.g. noise from sport facilities or restaurants.

The measurement of noise from external sound sources generating air-borne or ground-borne noise in the building are not included in this document.

The methods are suitable for rooms with volumes of approximately 300 m3 or less for instance, in dwellings, hotels, schools, offices and hospitals.

The methods are not intended for measurements in large auditoria or concert halls.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO/PAS 8329:2024
 
مواصفة قياسية دولية
Extended master connection file (χMCF) — Description of mechanical connections and joints in structural systems
IWA 45:2024
 
مواصفة قياسية دولية
Sustainable critical mineral supply chains
ISO/TS 5462:2024
 
مواصفة قياسية دولية
Rubber latex coated fabric gloves — Specification
ISO 19085-9:2024
 
مواصفة قياسية دولية
Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table)