ISO 32543-1:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٣ مايو ٢٠٢٤

Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 1: Pinhole camera radiographic method

ملفات الوثيقة ISO 32543-1:2024

الإنجليزية 15 صفحات
الإصدار الحالي
41.82 BHD

مجال الوثيقة ISO 32543-1:2024

This document specifies a method for the measurement of effective focal spot dimensions above 0,1 mm of X-ray systems up to and including 1 000 kV X-ray voltage by means of the pinhole camera method with digital evaluation. The tube voltage applied for this measurement is restricted to 200 kV for visual film evaluation and can be selected higher than 200 kV if digital detectors are used.

The imaging quality and the resolution of X-ray images depend highly on the characteristics of the effective focal spot, in particular the size and the two-dimensional intensity distribution as seen from the detector plane. Compared to the other methods specified in the EN 12543 series and the ISO 32543 series, this method allows to obtain an image of the focal spot and to see the state of it (e.g. cratering of the anode).

This test method provides instructions for determining the effective size (dimensions) of standard (macro focal spots) and mini focal spots of industrial X-ray tubes. This determination is based on the measurement of an image of a focal spot that has been radiographically recorded with a “pinhole” technique and evaluated with a digital method.

For the characterization of commercial X-ray tube types (i.e. for advertising or trade), the specific FS (focal spot) values of Annex A can be used.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 14617-1:2025
 
مواصفة قياسية دولية
Graphical symbols for diagrams — Part 1: General rules
ISO/IEC TS 18661-4:2025
 
مواصفة قياسية دولية
Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 4: Supplementary functions
ISO/IEC TS 18661-5:2025
 
مواصفة قياسية دولية
Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 5: Supplementary attributes
ISO 8871-5:2025
 
مواصفة قياسية دولية
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing