GSO ISO 10337:2009
Gulf Standard
Current Edition
·
Approved on
11 February 2009
·
Crude petroleum - determination of water - Coulometric Karl Fischer Titration Method
GSO ISO 10337:2009 Files
English
12 Pages
Current Edition
Reference Language
8.61 BHD
GSO ISO 10337:2009 Scope
This International Standard specifies a coulometric Karl Fischer titration method for the direct determination of water in crude
petroleum. It covers the range 0,050 % (m/m) to 5,00 % (m/m) water in crude petroleum containing less than 0,05 % (m/m) but
more than 0,005 % (m/m) of either mercaptan sulfur or sulfide ion sulfur or both. It covers the range 0,020 % (m/m) to
5,00 % (m/m) water in crude petroleum containing less than 0,005 % (m/m) of either mercaptan sulfur or sulfide ion sulfur or
both.
NOTE 1 A number of substances and classes of compounds associated with condensation or oxidation-reduction reactions interfere in the
determination of water by Karl Fischer titration. However, the only likely interfering substances present in crude petroleum are mercaptans
and ionic sulfides and providing that they are present at levels less than 0,05 % (m/m), the interference is insignificant when determining
water in the range 0,050 % (m/m) to 5,00 % (m/m).
NOTE 2 An alternative procedure is provided in annex B for the direct determination of water over the range 0,05 % (V/V) to
5,00 % (V/V) in crude petroleum containing less than 0,05 % (V/V) of either mercaptan sulfur or ionic sulfide sulfur or both. The limitations
under which this alternative volume measurement may be used are listed in annex B. The volume measurement may also be used to
determine water in the range 0,02 % (V/V) to 5,00 % (V/V) if the above interfering substances are present at levels of less than 0,005 % (V/V)
as either mercaptan sulfur or ionic sulfide sulfur or both.
NOTE 3 For the purposes of this International Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass and volume
fractions respectively
Best Sellers From Oil and Gas Sector
GSO 1785:2013
Gulf Technical Regulation
Lubricating Oils for Internal Combustion
Engines API Classifications
BH GSO 1785:2015
GSO 1785:2013
Bahraini Technical Regulation
Lubricating Oils for Internal Combustion
Engines API Classifications
GSO 1180:2021
Gulf Standard
Automatic transmission fluid (ATF)
BH GSO 1180:2022
GSO 1180:2021
Bahraini Standard
Automatic transmission fluid (ATF)
Recently Published from Oil and Gas Sector
BH GSO ASTM D7042:2023
GSO ASTM D7042:2023
Bahraini Standard
Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
BH GSO ASTM D6081:2023
GSO ASTM D6081:2023
Bahraini Standard
Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
BH GSO ASTM D4888:2023
GSO ASTM D4888:2023
Bahraini Standard
Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
BH GSO ISO 19901-9:2023
GSO ISO 19901-9:2023
Bahraini Standard
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 9: Structural integrity management