GSO ISO 14373:2021

Gulf Standard   Current Edition
· Approved on 01 July 2021 ·

Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels

Welding processes
Including thermal cutting and cladding

GSO ISO 14373:2021 Files

GSO ISO 14373:2021 Scope

ISO 14373:2015 specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm, for the following materials: uncoated steels; hot-dip zinc or iron-zinc alloy (galvannealed) coated steel; electrolytic zinc, zinc-iron, or zinc-nickel coated steel; aluminium coated steel; zinc-aluminium coated steel. It is applicable to welding of sheets of the same or dissimilar thickness, where the thickness ratio is less than or equal to 3:1. It applies to the welding of three thicknesses, where the total thickness is less than or equal to 9 mm.

Welding with the following types of equipment is within its scope: pedestal welding equipment; gun welders; automatic welding equipment where the components are fed by robots or automatic feeding equipment; multi welders; robotic welders. It also gives information, for guidance only, on appropriate welding equipment on spot welding conditions.

The welding of organic coated or primer coated steels is not within its scope.

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015 
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993 
Bahraini Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO EN 17344:2024
EN 17344:2020 
Gulf Standard
Agricultural machinery - Self-propelled agricultural and forestry vehicles - Requirements for braking
GSO ASTM E145:2024
ASTM E145:19 
Gulf Standard
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
GSO ISO 20766-10:2024
ISO 20766-10:2019 
Gulf Standard
Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 10: Gas-tight housing
GSO EN 840-6:2024
EN 840-6:2020 
Gulf Standard
Mobile waste and recycling containers - Part 6: Safety and health requirements