GSO EN 14023:2021
Gulf Standard
Current Edition
·
Approved on
01 July 2021
·
Bitumen and bituminous binders. Specification framework for polymer modified bitumens
GSO EN 14023:2021 Files
No files are available for this standard right now!
GSO EN 14023:2021 Scope
This European Standard provides a framework for specifying the characteristics and relevant test methods for polymer modified bitumens which are suitable for use in the construction and maintenance of roads, airfields and other paved areas. This framework covers the following characteristics: - "consistency at intermediate service temperature"; - "consistency at elevated service temperature"; - "cohesion"; - "durability" of consistency; - "brittleness at low service temperature"; - "strain recovery". The cohesion property has been included as a means of discriminating between polymer modified bitumens and other bituminous binders. The other essential requirements, "adhesion" and "setting ability" are indicated by tests carried out on the finished asphalt mixtures. The introduction of classes of convenience in Table 1, Table 2 and Table 3 enables the selection of the most suitable specification for the bitumen taking account of local conditions of climate and use. The nomenclature of polymer modified bitumens comprises the penetration range and the minimum softening point (see example in Annex A).
Best Sellers From Oil and Gas Sector
GSO 1785:2013
Gulf Technical Regulation
Lubricating Oils for Internal Combustion
Engines API Classifications
BH GSO 1785:2015
GSO 1785:2013
Bahraini Technical Regulation
Lubricating Oils for Internal Combustion
Engines API Classifications
GSO 1180:2021
Gulf Standard
Automatic transmission fluid (ATF)
BH GSO 1180:2022
GSO 1180:2021
Bahraini Standard
Automatic transmission fluid (ATF)
Recently Published from Oil and Gas Sector
BH GSO ASTM D7042:2023
GSO ASTM D7042:2023
Bahraini Standard
Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
BH GSO ASTM D6081:2023
GSO ASTM D6081:2023
Bahraini Standard
Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
BH GSO 1181:2023
GSO 1181:2023
Bahraini Standard
Lubricating oils for air compressors and vacuum pumps
BH GSO ASTM D4888:2023
GSO ASTM D4888:2023
Bahraini Standard
Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes