GSO 1206:2022

Gulf Standard   Current Edition
· Approved on 12 May 2022 · Edition 2

Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

GSO 1206:2022 Files

Arabic 23 Pages
Current Edition Reference Language
16.5 BHD
English 15 Pages
Current Edition
13.5 BHD

GSO 1206:2022 Scope

1.1 This Gulf standard is concerned with the determination of basic constituents in petroleum products by titration with perchloric acid in glacial acetic acid.. 1.2 Procedures A and B use different titration solvent volumes and sample weights. NOTE (1) A round robin on a series of new and used oils and additive concentrates has shown that the two procedures give statistically equivalent results.. 1.3 Appendix X2 provides the use of an alternative solvent system which eliminates the use of chlorobenzene in this test method. The use of the alternative solvent gives statistically equivalent results; however, the precision is worse. Paragraph X2.5.5 provides guidance when comparing results using the two different solvents. 1.4 The constituents that may be considered to have basic characteristics include organic and inorganic bases, amino compounds, salts of weak acids (soaps), basic salts of polyacidic bases, and salts of heavy metals. NOTE (2) This test method is applicable to both fresh oils and used oils as described in Sections 16, 17, and 19 and Appendix X1.. 1.5 This test method can be used to determine base number >300 mg KOH/g. However, the precision statement in Section 19 has been obtained only on base number ≤300 mg KOH/g. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Best Sellers From Oil and Gas Sector

GSO 1785:2013
 
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines API Classifications
BH GSO 1785:2015
GSO 1785:2013 
Bahraini Technical Regulation
Lubricating Oils for Internal Combustion Engines API Classifications
GSO 1180:2021
 
Gulf Standard
Automatic transmission fluid (ATF)
BH GSO 1180:2022
GSO 1180:2021 
Bahraini Standard
Automatic transmission fluid (ATF)

Recently Published from Oil and Gas Sector

BH GSO ASTM D4888:2023
GSO ASTM D4888:2023 
Bahraini Standard
Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
BH GSO ISO 19901-9:2023
GSO ISO 19901-9:2023 
Bahraini Standard
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 9: Structural integrity management
BH GSO ISO 10423:2023
GSO ISO 10423:2023 
Bahraini Standard
Petroleum and natural gas industries — Drilling and production equipment — Wellhead and tree equipment
BH GSO ISO 13503-3:2023
GSO ISO 13503-3:2023 
Bahraini Standard
Petroleum and natural gas industries — Completion fluids and materials — Part 3: Testing of heavy brines