BH GSO ISO 10337:2024
ISO 10337:1997
Bahraini Standard
Current Edition
·
Approved on
21 November 2024
Crude petroleum - determination of water - Coulometric Karl Fischer Titration Method
BH GSO ISO 10337:2024 Files
No files for this standard are available in the store currently.
BH GSO ISO 10337:2024 Scope
This International Standard specifies a coulometric Karl Fischer titration method for the direct determination of water in crude
petroleum. It covers the range 0,050 % (m/m) to 5,00 % (m/m) water in crude petroleum containing less than 0,05 % (m/m) but
more than 0,005 % (m/m) of either mercaptan sulfur or sulfide ion sulfur or both. It covers the range 0,020 % (m/m) to
5,00 % (m/m) water in crude petroleum containing less than 0,005 % (m/m) of either mercaptan sulfur or sulfide ion sulfur or
both.
NOTE 1 A number of substances and classes of compounds associated with condensation or oxidation-reduction reactions interfere in the
determination of water by Karl Fischer titration. However, the only likely interfering substances present in crude petroleum are mercaptans
and ionic sulfides and providing that they are present at levels less than 0,05 % (m/m), the interference is insignificant when determining
water in the range 0,050 % (m/m) to 5,00 % (m/m).
NOTE 2 An alternative procedure is provided in annex B for the direct determination of water over the range 0,05 % (V/V) to
5,00 % (V/V) in crude petroleum containing less than 0,05 % (V/V) of either mercaptan sulfur or ionic sulfide sulfur or both. The limitations
under which this alternative volume measurement may be used are listed in annex B. The volume measurement may also be used to
determine water in the range 0,02 % (V/V) to 5,00 % (V/V) if the above interfering substances are present at levels of less than 0,005 % (V/V)
as either mercaptan sulfur or ionic sulfide sulfur or both.
NOTE 3 For the purposes of this International Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass and volume
fractions respectively
Best Sellers From Oil and Gas Sector
GSO 1785-1:2024
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines – Part 1: API Classifications of Lubricating Oils for Gasoline and Diesel Engines
GSO 672:2010
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 1785-2:2023
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines – Part 2: ACEA European Oil Sequences for Gasoline Engines and Diesel Engines
GSO 1161:2021
Gulf Standard
HLP HYDRAULIC OILS
Recently Published from Oil and Gas Sector
GSO ASTM D4952:2026
ASTM D4952:23
Gulf Standard
Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
GSO ISO/TS 21343:2026
ISO/TS 21343:2025
Gulf Standard
Oil and gas industries including lower carbon energy — Fuel ammonia —Requirements and guidance for boilers for power generation
GSO ASTM D1838:2026
ASTM D1838:21
Gulf Standard
Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
GSO ASTM D7653:2026
ASTM D7653:24
Gulf Standard
Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy