BH GSO ISO 10573:2016

ISO 10573:1995
Bahraini Standard   Current Edition · Approved on 08 February 2016

Soil quality - Determination of water content in the unsaturated zone - Neutron depth probe method

BH GSO ISO 10573:2016 Files

English 13 Pages
Current Edition Reference Language
BHD 46.34

BH GSO ISO 10573:2016 Scope

This International Standard specifies an in situ method for the determination of water content in the unsaturated zone of soils using a neutron depth probe. lt is applicable when investigations into the water storage, water balance and water distribution in the unsaturated zone of the soil are carried out. Because the method is non-destructive, it is particularly suitable for repeated measurements at fixed locations. Water content profiles tan be obtained by measuring at a series of depths down to any depth within the range of the phreatic level at the site. The advantage of the method compared with some others, for example the gamma probe method, is the rapidity with which measurements tan be carried out. A disadvantage, however, is the relatively poor depth resolution of the measurements.

Best Sellers From Chemical and Textile Sector

GSO 1943:2024
 
Gulf Technical Regulation
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
BH GSO 1943:2024
GSO 1943:2024 
Bahraini Technical Regulation
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
GSO 2528:2024
 
Gulf Technical Regulation
Cosmetic products – Technical Regulation of Cosmetic and Personal Care Products Claims
BH GSO 2528:2024
GSO 2528:2024 
Bahraini Technical Regulation
Cosmetic products – Technical Regulation of Cosmetic and Personal Care Products Claims

Recently Published from Chemical and Textile Sector

GSO ISO 1139:1994
ISO 1139:1973 
Gulf Standard
Textile -designation of yarns.
GSO ISO 456:1994
ISO 456:1973 
Gulf Standard
Surface active agents: Analysis of soaps - Determination of free caustic alkali
GSO EN 1433:2025
EN 1433:2002 
Gulf Standard
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
GSO EN 12201-2:2025
EN 12201-2:2024 
Gulf Standard
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes