BH GSO ISO 9386-1:2016

ISO 9386-1:2000
Bahraini Standard   Current Edition · Approved on 08 February 2016

Power-operated lifting platforms for persons with impaired mobility - Rules for safety, dimensions and functional operation - Part 1: Vertical lifting platforms

BH GSO ISO 9386-1:2016 Files

English 67 Pages
Current Edition Reference Language
BHD 92.23

BH GSO ISO 9386-1:2016 Scope

This part of ISO 9386 specifies the safety rules, dimensions and functional operation for permanently installed power-operated vertical lifting platforms intended for use by persons with impaired mobility when standing or sitting in a wheelchair, with or without an attendant. It specifies requirements for lifting platforms a) installed within enclosed liftways, and b) whose design or location permits their use without an enclosed liftway. It is restricted to the following lifting platforms: a) those which travel between fixed levels; b) those without liftway enclosure and without floor penetration: 1) with travel up to 2,0 m, 2) in private dwellings with travel up to 4,0 m; c) those with liftway enclosure with travel up to 4,0 m; d) those whose rated speed does not exceed 0,15 m/s; e) those whose line of travel does not exceed 15° from the vertical and; f) those whose rated load is not less than 250 kg. This part of ISO 9386 does not specify every general technical requirement for all aspects of the electrical, mechanical or building construction.

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015 
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993 
Bahraini Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025 
Gulf Standard
Ladders - Part 3: Marking and user instructions
GSO ISO 22705-3:2026
ISO 22705-3:2024 
Gulf Standard
Springs — Measurement and test parameters — Part 3: Cold formed cylindrical helical torsion springs
GSO ISO 14732:2026
ISO 14732:2025 
Gulf Standard
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
GSO EN 1514-4:2026
EN 1514-4:1997 
Gulf Standard
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges