BH GSO IEC 60603-5:2016
IEC 60603-5:1987
Bahraini Standard
Current Edition
·
Approved on
08 February 2016
Connectors for frequencies below 3 MHz for use with printed boards. Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (0.1 in) spacing
BH GSO IEC 60603-5:2016 Files
English
null Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
BH GSO IEC 60603-5:2016 Scope
This standard covers a range of connectors with 2.54 mm (0.1 in) spacing intended to connect a
double sided printed board to another printed board or wires.
Two kinds of connector are available:
– One-part edge-socket connector.
Fixed connector or (female) receptacle is intended to mate with edge board contacts.
– Two-part connector.
Fixed connector or (female) receptacle is intended to mate with free connector of board-mounted
(male) connector.
For these two cases, fixed connectors or (female) receptacles are the same.
Fixed connectors are available with:
– solder terminations for wire,
– solder terminations for board up to 3.44 mm (0.135 in),
– wrapped terminations.
Free connectors are provided with flat solder terminations for double sided board of nominal thickness
1.6 mm (0.063 in).
For edge-socket connectors only, polarization and coding are available by means of a device
mounted instead of two opposite contacts.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO ISO 20816-21:2026
ISO 20816-21:2025
Gulf Standard
Mechanical vibration — Measurement and evaluation of machine vibration — Part 21: Horizontal axis wind turbines
GSO CEN/TR 16999:2026
CEN/TR 16999:2019
Gulf Standard
Solar energy systems for roofs - Requirements for structural connections to solar panels
GSO IEC TR 63411:2026
IEC TR 63411:2025
Gulf Standard
Grid connection of offshore wind via VSC-HVDC systems
GSO IEC 60884-2-7:2026
IEC 60884-2-7:2025
Gulf Standard
Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets