BH GSO ISO 16032:2016
Bahraini Standard
Current Edition
·
Approved on
08 February 2016
·
Acoustics -- Measurement of sound pressure level from service equipment in buildings -- Engineering method
BH GSO ISO 16032:2016 Files
English
19 Pages
Current Edition
Reference Language
57.64 BHD
BH GSO ISO 16032:2016 Scope
This document specifies methods for measuring the sound pressure level from service equipment in buildings installed to building structures. This document covers specifically measurements of sanitary installations, mechanical ventilation, heating and cooling service equipment, lifts, rubbish chutes, boilers, blowers, pumps and other auxiliary service equipment, and motor driven car park doors, but can also be applied to other equipment attached to or installed in buildings.
The methods are suitable for rooms with volumes of approximately 300 m3 or less in e.g. dwellings, hotels, schools, offices and hospitals. The standard is not in general intended for measurements in large auditoria and concert halls. However, the operating conditions and operating cycles in Annex B can be used in such cases.
The service equipment sound pressure level is determined as the maximum A- weighted and optionally C- weighted sound pressure level occurring during a specified operation cycle of the service equipment under test, or as the equivalent continuous sound pressure level determined with a specified integration time. A-weighted and C- weighted values are calculated from octave-band measurements
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
BH GSO OIML R87:2022
GSO OIML R87:2021
Bahraini Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
BH GSO OIML R79:2022
GSO OIML R79:2021
Bahraini Standard
Labeling requirements for prepackages
Recently Published from Metrology Sector
GSO ISO 748:2024
ISO 748:2021
Gulf Standard
Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
GSO IEC 62828-4:2024
IEC 62828-4:2020
Gulf Standard
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
GSO IEC 62586-1:2024
IEC 62586-1:2017
Gulf Standard
Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
GSO ISO 10360-10:2024
ISO 10360-10:2021
Gulf Standard
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers