BH GSO IEC 61041-5:2016

IEC 61041-5:1997
Bahraini Standard   Current Edition · Approved on 08 February 2016

Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL)

BH GSO IEC 61041-5:2016 Files

English null Pages
Current Edition Reference Language

BH GSO IEC 61041-5:2016 Scope

This part of IEC 61041 specifies the general requirements for methods of measurement for high-band video tape recorders, including those equipped with Y/C video connector(s) (NTSC/PAL). This part of IEC 61041 is applicable both to machines using normal input/output connectors for the measurement of the composite video signal, and to machines using the Y/C video connector(s) (herein after referred to as S video connectors) for the measurement of the Y/C separated video signal. This part of IEC 61041 is applicable when characteristics of the video and audio signals recorded and reproduced using high-band video tape recorders are to be checked and measured. The object of this part is to describe the methods of measurement for non-broadcast video tape recorders.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007 
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 35:2007
 
Gulf Standard
Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines

Recently Published from Electrical Sector

GSO IEC 61730-1:2025
IEC 61730-1:2023 
Gulf Standard
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
GSO IEC 60335-2-124:2025
IEC 60335-2-124:2024 
Gulf Standard
Household and similar electrical appliances - Safety - Part 2-124: Particular requirements for commercial dry ice blasting machines
GSO IEC 61347-2-11:2025
IEC 61347-2-11:2024 
Gulf Standard
Controlgear for electric light sources - Safety - Part 2-11: Particular requirements - Miscellaneous electronic circuits used with luminaires
GSO IEC 61058-2-1:2025
IEC 61058-2-1:2018 
Gulf Standard
Switches for appliances - Part 2-1: Particular requirements for cord switches