BH GSO ECE 100:2022
ECE 100:2014
Bahraini Standard
Current Edition
·
Approved on
28 April 2022
Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train
BH GSO ECE 100:2022 Files
English
78 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
BH GSO ECE 100:2022 Scope
1.1. Part I: Safety requirements with respect to the electric power train of road
vehicles of categories M and N1
, with a maximum design speed exceeding 25
km/h, equipped with one or more traction motor(s) operated by electric
power and not permanently connected to the grid, as well as their high
voltage components and systems which are galvanically connected to the
high voltage bus of the electric power train.
Part I of this regulation does not cover post-crash safety requirements of road
vehicles.
1.2. Part II: Safety requirements with respect to the Rechargeable Energy Storage
System (REESS), of road vehicles of categories M and N equipped with one
or more traction motors operated by electric power and not permanently
connected to the grid.
Part II of this Regulation does not apply to REESS(s) whose primary use is to
supply power for starting the engine and/or lighting and/or other vehicle
auxiliaries systems.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025
Gulf Standard
Ladders - Part 3: Marking and user instructions
GSO ISO 22705-3:2026
ISO 22705-3:2024
Gulf Standard
Springs — Measurement and test parameters — Part 3: Cold formed cylindrical helical torsion springs
GSO ISO 14732:2026
ISO 14732:2025
Gulf Standard
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
GSO EN 1514-4:2026
EN 1514-4:1997
Gulf Standard
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges