BH GSO ASTM A126:2024
ASTM A126:04(2023)
Bahraini Standard
Current Edition
·
Approved on
14 April 2024
Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
BH GSO ASTM A126:2024 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
BH GSO ASTM A126:2024 Scope
This guide covers standard specification for three classes of gray iron for castings intended for use as valve pressure retaining parts, pipe fittings, and flanges. Chemical analysis shall be performed in each lot and shall conform to the required chemical composition for phosphorous and sulfur. Tension test shall be conducted on each class of gray iron castings and shall conform to the specified values of tensile strength. Tension test specimens shall have threaded ends and shall conform to the prescribed dimensions.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ISO/TR 5262:2025
ISO/TR 5262:2023
Gulf Standard
Motorcycles — Guideline for verification of total running resistance force during mode running on a chassis dynamometer
GSO ISO/IEC 80079-20-1:2025
ISO/IEC 80079-20-1:2017
Gulf Standard
Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data
GSO ISO 22915-10:2025
ISO 22915-10:2023
Gulf Standard
Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
GSO ISO 19438:2025
ISO 19438:2023
Gulf Standard
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity