GSO EN 13977:2011
EN 13977:2005
Gulf Standard
Current Edition
·
Approved on
12 April 2011
Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
GSO EN 13977:2011 Files
English
36 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO EN 13977:2011 Scope
This document deals with the technical requirements to minimise the railway specific significant hazards of portable
machines and trolleys used for work on tracks as listed in clause 4 and annex A which can arise during the
commissioning, the operation and the maintenance of portable machines and trolleys when used as intended and
under the conditions foreseen by the manufacturer. It does not deal with the general function of the machines (e.g.
cutting, drilling, grinding).
This document applies to portable machines and portable trolleys designed for work on the track with nominal track
gauges of 1 435 mm and 1 668 mm and clearance gauge as defined in annex B including cutting machines and
those designed for working on wooden sleepers.
This document does not apply to portable trolleys coupled together, whether or not self propelled, and trolleys used
for transporting personnel.
For portable machines and trolleys used on railway lines with a different clearance gauge to that defined in
annex B specific requirements concerning the clearance gauge may apply1).
This document does not apply to the following:
requirements for quality of the work or performance of the machine;
regulations defined by each infrastructure controller for portable machine and trolley operation which shall
be the subject of negotiation between the user and the manufacturer;
portable machines used from railway vehicles.
This document does not establish the additional requirements for the following:
operation in severe conditions (e.g. extreme environmental conditions such as: freezing applications, high
temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic
fields);
operation subject to special rules as potentially explosive atmospheres;
electromagnetic compatibility, due to e.g. electronic components;
hazards occurring during decommissioning and/or recycling;
hazards due to vibration;
hazards due to wind speed greater than 35 m/s;
hazards due to natural causes e.g. earthquake, lightning, flooding etc.
noise.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
BH GSO 1427:2024
GSO 1427:2008
Bahraini Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls
Recently Published from Construction and Building Sector
GSO 113:1989
Gulf Standard
TECHNICAL TERMS AND DEFINITIONS USED
IN SPINNING AND WEAVING INDUSTRY
PART 2: FABRIC DEFECTS
GSO EN 12939:2025
EN 12939:2000
Gulf Standard
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
GSO ASTM C109/C109M:2025
ASTM C109/C109M:24
Gulf Standard
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm [2 in.] Cube Specimens)
GSO ISO/TS 16774-2:2025
ISO/TS 16774-2:2023
Gulf Standard
Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 2: Test method for chemical resistance