GSO EN 12621:2011

EN 12621:2006
Gulf Standard   Current Edition · Approved on 12 October 2011

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

GSO EN 12621:2011 Files

GSO EN 12621:2011 Scope

This European Standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure in the following called "machine" (see 3.1). The coating material is supplied by air pressure or airless. NOTE Machines covered by this European Standard may be linked with e.g. colour mixing machinery, atomising and spraying equipment, spray booths and stands and/or automated coating machinery. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. This European Standard deals with the significant hazards, hazardous situations and events relevant to the machinery for the supply and circulation of coating and/or auxiliary materials under pressure, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Machinery for the supply and circulation of coating and/or auxiliary materials under pressure consists of the following equipment: - pump units; - pressure vessels; - non-pressurised containers; - interconnecting pipes and hoses - flanges, nozzles, couplings, supports, lifting equipment etc.; - agitators; - filters; - pulsation damping devices; - all safety devices (e.g. level monitoring equipment); - equipment for heating and/or cooling of the coating materials. The machine may be fixed or mobile. 1.2 This European Standard excludes: - pressure related hazards of equipment classified as higher than category 1 under article 9 of the Pressure Equipment Directive 97/23/EC; - atomising and spraying equipment as dealt with in EN 1953:1998 and the supply hoses for this equipment; - atomising and spraying equipment as dealt with in EN 50144-2-7:2001, EN 50260-2-7:2002 and the supply hoses for this equipment. This European Standard does not apply to: - machinery for processing of foodstuffs and pharmaceuticals;

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015 
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993 
Bahraini Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ISO 6742-3:2025
ISO 6742-3:2023 
Gulf Standard
Cycles — Lighting and retro-reflective devices — Part 3: Installation and use of lighting and retro-reflective devices
GSO ISO 24163-1:2025
ISO 24163-1:2024 
Gulf Standard
Clamp-in tyre valves for tyre pressure monitoring systems — Part 1: Definition, types, dimensions and valve interface
GSO ISO 9374-1:2025
ISO 9374-1:2024 
Gulf Standard
Cranes — Information to be provided — Part 1: General
GSO ISO 5640:2025
ISO 5640:2024 
Gulf Standard
Industrial valves — Mounting kits for part-turn valve actuator attachment