GSO ISO 10648-2:2013

ISO 10648-2:1994
Gulf Standard   Current Edition · Approved on 01 April 2013

Containment enclosures -- Part 2: Classification according to leak tightness and associated checking methods

GSO ISO 10648-2:2013 Files

English 14 Pages
Current Edition Reference Language
44.48 BHD

GSO ISO 10648-2:2013 Scope

This part of ISO 10648 gives a classification of containment enclosures according to leak tightness and specifies methods for checking this tightness for the following tests: — manufacturing test at the factory, — acceptance test at the laboratory, — test before commissioning, — periodical tests during operation. These last two tests shall comply with relevant standards and local regulations. The object of this part of ISO 10648 is to provide manufacturers, suppliers, users and the competent authorities with uniform principles in test procedures for testing the leak tightness of containment enclosures and for ascertaining the leak rate. The tests cover the containment enclosures equipped with the basic components (see ISO 10648-1:—, annex B). All openings (for example glove ports and ventilation openings) are sealed with tight-fitting or sealable covers. If additional equipments are to be used, a new control test taking into account these equipments should be performed.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007 
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 35:2007
 
Gulf Standard
Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines

Recently Published from Electrical Sector

GSO 195:1994
 
Gulf Standard
METHODS OF TEST FOR ADHESIVE INSULATING TAPES FOR ELECTRICAL PURPOSES
GSO 31:1984
 
Gulf Standard
METHODS OF TEST FOR PVC-INSULATED CABLES AND CORDS WITH CIRCULAR COPPER CONDUCTORS
GSO 1842:2007
 
Gulf Standard
METHODS OF TESTING FOR PLUGS AND SOCKET OUTLETS FOR VOLTAGES FROM 127V AND UP TO 250V FOR HOUSEHOLD AND SIMILAR GENERAL USE
GSO 723:1997
 
Gulf Standard
Methods of test for telephone sets.