GSO IEC 61097-8:2014

IEC 61097-8:1998
Gulf Standard   Current Edition · Approved on 25 December 2014

Global maritime distress and safety system (GMDSS) - Part 8: Shipborne watchkeeping receivers for the reception of digital selective calling (DSC) in the maritime MF, MF/HF and VHF bands - Operational and performance requirements, methods of testing and required test results

GSO IEC 61097-8:2014 Files

English 38 Pages
Current Edition Reference Language

GSO IEC 61097-8:2014 Scope

This part of IEC 61097 specifies the minimum requirements for shipborne receivers intended to be connected to an external installation, including a decoder for digital selective calling (DSC), and used as receivers for watchkeeping on DSC channels on board ships operating in the maritime mobile MF, MF/HF and VHF bands allocated in the Radio Regulations of the International Telecommunication Union (ITU) to the maritime mobile service, both in connection with distress and safety communication and in connection with general communication. These requirements include the relevant provisions of the Radio Regulations and recommendations ITU-R M.489, and ITU-R M.541, and relevant provisions of resolutions A.694, A.803, A.804 and A.806 of the International Maritime Organization (IMO). This standard also specifies technical characteristics, methods of testing and required test results for dedicated watchkeeping receivers for use with radio installations in the GMDSS as required by chapter IV of the International Convention for Safety of Life at Sea (SOLAS) 1974, as amended, and with which IEC 60945 is associated. When a requirement in this standard differs from IEC 60945, the requirement of this standard takes precedence. This standard covers receivers with analogue or with digital DSC signal output interfaces or with both. DSC watchkeeping receivers can be either fixed frequency receivers or, in MF/HF bands, scanning receivers. They may be a separate equipment or be integrated with a DSC or radiotelephone equipment. For integrated equipment this standard specifies the requirements and methods of testing of the DSC watchkeeping receivers only. The DSC equipment or radiotelephone shall comply with the requirements of the relevant standard, for example, IEC 61097-3 [3]*, IEC 61097-7 [4] and IEC 61097-9 [5] respectively. NOTE – All requirements of this standard resulting from the above referenced IMO resolutions or ITU recommendations are identified by quoting the number of the IMO resolution or ITU recommendation and relevant paragraph in brackets following the requirement.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007 
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 35:2007
 
Gulf Standard
Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines

Recently Published from Electrical Sector

GSO IEC 60335-2-16:2024
IEC 60335-2-16:2022 
Gulf Standard
Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
GSO IEC 60335-2-28:2024
IEC 60335-2-28:2021 
Gulf Standard
Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
GSO IEC TR 61850-7-5:2024
IEC TR 61850-7-5:2021 
Gulf Standard
Communication networks and systems for power utility automation - Part 7-5: IEC 61850 modelling concepts
GSO IEC 61400-27-1:2024
IEC 61400-27-1:2020 
Gulf Standard
Wind energy generation systems - Part 27-1: Electrical simulation models - Generic models