GSO IEC 62061:2014
Gulf Standard
Current Edition
·
Approved on
25 December 2014
·
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
GSO IEC 62061:2014 Files
No files are available for this standard right now!
GSO IEC 62061:2014 Scope
This International Standard specifies requirements and makes recommendations for the design, integration and validation of safety-related electrical, electronic and programmable electronic control systems (SRECS) for machines (see Notes 1 and 2). It is applicable to control systems used, either singly or in combination, to carry out safety-related control functions on machines that are not portable by hand while working, including a group of machines working together in a co-ordinated manner.
NOTE1 In this standard, the term “electrical control systems” is used to stand for ”Electrical, Electronic and Programmable Electronic (E/E/PE) control systems” and “SRECS” is used to stand for “safety-related electrical, electronic and programmable electronic control systems”.
NOTE 2 In this standard, it is presumed that the design of complex programmable electronic subsystems or subsystem elements conforms to the relevant requirements of IEC 61508 and uses Route 1 H(see IEC 61508-2:2010 , 7.4.4.2). It is considered that Route 2H (see IEC 61508-2:2010,7.4.4.3) is not suitable for general machinery. Therefore, this standard does not deal with Route 2H. This standard provides a methodology for the use, rather than development, of such subsystems and subsystem elements as part of a SRECS.
This standard is an application standard and is not intended to limit or inhibit technological advancement. It does not cover all the requirements (e.g. guarding, non-electrical interlocking or non-electrical control) that are needed or required by other standards or regulations in order to safeguard persons from hazards. Each type of machine has unique requirements to be satisfied to provide adequate safety.
This standard:
–is concerned only with functional safety requirements intended to reduce the risk of injury or damage to the health of persons in the immediate vicinity of the machine and those directly involved in the use of the machine;
– is restricted to risks arising directly from the hazards of the machine itself or from a group of machines working together in a co-ordinated manner;
NOTE 3
Requirements to mitigate risks arising from other hazards are provided in relevant sector standards. For example, where a machine(s) is part of a process activity, the machine electrical control system functional safety requirements should, in addition, satisfy other requirements (e.g. IEC 61511) insofar as safety of the process is concerned.
– does not specify requirements for the performance of non-electrical (e.g. hydraulic,
pneumatic) control elements for machines;
NOTE 4 Although the requirements of this standard are specific to electrical control systems, the framework and methodology specified can be applicable to safety related parts of control systems employing other technologies.
– does not cover electrical hazards arising from the electrical control equipment itself (e.g. electric shock –see IEC 60204 –1).
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
BH GSO 34:2015
GSO 34:2007
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
![BH Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_bh_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Electrical Sector
GSO IEC 63296-1:2024
IEC 63296-1:2021
Gulf Standard
Portable multimedia equipment - Determination of battery duration - Part 1: Powered loudspeaker equipment
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![IEC Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iec_sml.png)
GSO IEC 61558-2-4:2024
IEC 61558-2-4:2021
Gulf Standard
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![IEC Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iec_sml.png)
GSO IEC 60335-2-23:2024
IEC 60335-2-23:2016
Gulf Standard
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![IEC Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iec_sml.png)
GSO IEC 63174:2024
IEC 63174:2021
Gulf Standard
Electrically operated toothbrushes - Methods for measuring the performance
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![IEC Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iec_sml.png)