GSO IEC 60413:2014
IEC 60413:1972
Gulf Standard
Current Edition
·
Approved on
25 December 2014
Test procedures for determining physical properties of brush materials for electrical machines
GSO IEC 60413:2014 Files
English
41 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 60413:2014 Scope
The properties determined by these tests are inherent in the brush materials themselves as distinct
from performance characteristics in operation on electrical equipment.
Values of physical properties published in catalogues, etc., shall be based upon test methods,
given in these recommendations.
The purpose of the different sections in these recommendations is to provide a uniform procedure
for determining the following properties of brush materials:
Density and porosity;
Hardness;
Resistivity;
Transverse strength;
— Ash content.
Some test methods are suitable for use in production quality control, others only for more
thorough investigations, using precise laboratory techniques.
It should be kept in mind that since brush materials are generally brittle, porous materials, it is
reasonable that their properties vary much more than the same properties in metals.
Samples used for these tests must be representative of the batch of material involved using a
recognized and/or agreed sampling procedure or technique.
Best Sellers From Electrical Sector
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 1899:2016
Gulf Standard
GCC Standard voltages and frequencies for AC transmission and distribution systems
Recently Published from Electrical Sector
GSO IEC TR 63411:2026
IEC TR 63411:2025
Gulf Standard
Grid connection of offshore wind via VSC-HVDC systems
GSO IEC 60884-2-7:2026
IEC 60884-2-7:2025
Gulf Standard
Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets
GSO IEC 63522-32:2026
IEC 63522-32:2025
Gulf Standard
Electrical relays - Tests and measurements - Part 32: Acoustic noise
GSO IEC 61362:2026
IEC 61362:2024
Gulf Standard
Guidelines to specification of hydraulic turbine governing systems