GSO ISO 4954:2017

Gulf Standard   ACTIVE

Steels for cold heading and cold extruding

Adoption by Endorsement

Adoption by endorsement for the latest version of this international/national standard and the previous adopted edition remains effective for 2 years starting from the date of last international update

Scope
1.1.1 This International Standard applies to wrought unalloyed and alloyed steels which are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It contains five sections covering the following topics: Section 1 - general requirements common to all sections. Section 2 - steels not intended for heat treatment, with diameters from 2 mm to 100 mm. Section 3 - case-hardening steels with diameters from 2 mm to 100 mm. Section 4 - steels for quenching and tempering including boron treated steels, with diameters from 2 mm to 100 mm. Section 5 - stainless steels with diameters of 2 mm up to 25 mm for ferritic, up to 100 mm for martensitic, and up to 50 mm for austenitic steels. 1.1.2 This International Standard (except section 2) is not applicable to the properties of cold-headed or cold-extruded parts which have not been subjected to a subsequent heat treatment. As the properties of the parts in the cold headed or cold extruded and subsequently not-heat-treated condition are largely dependent on the applied coldheading or cold-extruding conditions, these should, if necessary, be a matter of agreement between the purchaser and the manufacturer of the parts. 1.1.3 In addition to this International Standard, the general technical delivery requirements of IS0 404 are applicable. ISO/TR 9769:1991, Steel and iron - Review of avail- - able methods of analysis. IS0 10474:1991, Steel and steel products - Inspection documents.
Endorsement
ISO 4954:1993
03 October 2017
Stainless steels
Including alloyed steels, corrosion-resistant steels, heat-resisting steels, etc.

Files

English
38 Pages
23.51 BHD
 

Best Sellers From Construction and Building Sector

GSO 1914:2009
 
Gulf Standard
Portland Cement
GSO 938:2009
 
Gulf Standard
Test Methods for Chemical Properties of Portland Cement
GSO 1915:2009
 
Gulf Standard
Test Methods for Physical Properties of Portland Cement ICS :
GSO 1431:2002
 
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices

Recently Published from Construction and Building Sector

GSO EN 1849-1:2021
EN 1849-1:2000 
Gulf Standard
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
GSO EN 295-7:2021
EN 295-7:2013 
Gulf Standard
Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
GSO EN 323:2021
EN 323:1993 
Gulf Standard
Wood-based panels - Determination of density
GSO EN 35:2021
EN 35:2014 
Gulf Standard
Pedestal and Wall-hung bidets with over-rim supply – Connecting dimensions