GSO IEC 61300-3-51:2017
Gulf Standard
Current Edition
·
Approved on
03 October 2017
·
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: Examinations and measurements - Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors
GSO IEC 61300-3-51:2017 Files
No files are available for this standard right now!
GSO IEC 61300-3-51:2017 Scope
This part of IEC 61300 is intended to describe the procedure required to measure the pin gauge withdrawal force for rectangular ferrule multi-fibre connectors.
This measurement can be used as an alternative to the measurement of the pin gauge insertion force, both of which evaluate the fit of the pin gauge(s) into the guide pin hole(s) of the female-type connector. The experimental verification of interchangeability between them is shown in Annex A.
For the male-type connector, IEC 61300-3-49 is applied to evaluate how securely the guide pins are retained in the guide holes.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO IEC 63373:2024
IEC 63373:2022
Gulf Standard
Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
GSO IEC 60755-1:2024
IEC 60755-1:2022
Gulf Standard
General safety requirements for residual current operated protective devices - Part 1: Residual current operated protective devices for DC systems
GSO IEC TR 63227:2024
IEC TR 63227:2020
Gulf Standard
Lightning and surge voltage protection for photovoltaic (PV) power supply systems
GSO IEC 62788-7-3:2024
IEC 62788-7-3:2022
Gulf Standard
Measurement procedures for materials used in photovoltaic modules - Part 7-3: Accelerated stress tests - Methods of abrasion of PV module external surfaces