GSO ISO 14405-3:2021

Gulf Standard   Current Edition

Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes

Adoption by Endorsement

Adoption by endorsement for the latest version of this international/national standard and the previous adopted edition remains effective for 2 years starting from the date of last international update

Scope

This part of ISO 14405 establishes the default specification operator for angular size and defines a number of special specification operators for features of angular size: cone (truncated, i.e. frustum, or not), wedge (truncated or not), two opposite straight lines (intersection of a wedge/truncated wedge and a plane perpendicular to the intersection straight line of the two planes of the wedge/truncated wedge, intersection of a cone/frustum and a plane containing the axis of revolution of the cone/frustum). See Figure 1 and Figure 2.

This part of ISO 14405 also defines the specification modifiers and the drawing indications for these angular sizes.

This part of ISO 14405 covers the following angular sizes:

—    local angular size:

—    angular size between two lines;

—    portion angular size;

—    global angular size:

—    direct global angular size:

—    least squares angular size;

—    minimax angular size;

—    rank order angular size/indirect global angular size:

—    maximum angular size;

—    minimum angular size;

—    average angular size;

—    range of angular sizes;

—    mid-range angular size;

—    median angular size;

—    standard deviation of angular size.

This part of ISO 14405 defines the meaning of tolerances of angular sizes indicated as

—    + and/or - limit deviations, e.g. 0°/-0,5°, or

—    indicated with upper limit of size (ULS) and/or lower limit of size (LLS), e.g. 35° max. or 15° min., 34°/36°,

—    with or without modifiers.

This part of ISO 14405 provides a set of tools to express several types of angular size characteristics. It does not give any information on the relationship between a function or a use and an angular size characteristic.

Endorsement
ISO 14405-3:2016
01 July 2021

Files

 
 

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO 1:1990
 
Gulf Standard
The international system of units Part 1: Quantities and base,supplementary and derived units.
GSO 2:1990
 
Gulf Technical Regulation
The international system of units,Part 2: decimal and sub-multiples of the SI units of rules for their use and writing theird symbols.
GSO OIML R121:2007
OIML R 121:1996 
Gulf Standard
The Scale of Relative Humidity of Air Certified Against Saturated Salt Solutions

Recently Published from Metrology Sector

GSO ASTM E74:2022
ASTM E74:2018 
Gulf Standard
Standard Practices for Calibration and Verification for Force-Measuring Instruments
GSO ASTM D6216:2021
ASTM D6216:2012 
Gulf Standard
Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
GSO CISPR TR 28:2021
CISPR TR 28:1997 
Gulf Standard
Industrial, scientific and medical equipment (ISM) - Guidelines for emission levels within the bands designated by the ITU
GSO CISPR TR 31:2021
CISPR TR 31:2012 
Gulf Standard
Database on the characteristics of radio services