GSO ISO/ASTM 51275:2021

Gulf Standard   Current Edition

Practice for use of a radiochromic film dosimetry system

Adoption by Endorsement

Adoption by endorsement for the latest version of this international/national standard and the previous adopted edition remains effective for 2 years starting from the date of last international update

Scope

ISO/ASTM 51275:2013 is a practice for using radiochromic film dosimetry systems to measure absorbed dose in materials irradiated by photons or electrons in terms of absorbed dose to water.

Radiochromic film dosimetry systems are generally used as routine dosimetry systems.

The radiochromic film dosimeter is classified as a Type II dosimeter on the basis of the complex effect of influence quantities.

ISO/ASTM 51275:2013 is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ASTM E2628 for a radiochromic film dosimetry system. It is intended to be read in conjunction with ASTM E2628.

Endorsement
ISO/ASTM 51275:2013
01 July 2021
Radiation measurements
Including dosimetry

Files

 
 

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO 1:1990
 
Gulf Standard
The international system of units Part 1: Quantities and base,supplementary and derived units.
GSO 2:1990
 
Gulf Technical Regulation
The international system of units,Part 2: decimal and sub-multiples of the SI units of rules for their use and writing theird symbols.
GSO OIML R121:2007
OIML R 121:1996 
Gulf Standard
The Scale of Relative Humidity of Air Certified Against Saturated Salt Solutions

Recently Published from Metrology Sector

GSO ASTM E74:2022
ASTM E74:2018 
Gulf Standard
Standard Practices for Calibration and Verification for Force-Measuring Instruments
GSO ISO 6507-2:2021
ISO 6507-2:2018 
Gulf Standard
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
GSO ISO 362-3:2021
ISO 362-3:2016 
Gulf Standard
Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories
GSO ISO 16063-45:2021
ISO 16063-45:2017 
Gulf Standard
Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil