GSO ISO 15500-12:2021

Gulf Standard   Current Edition

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 12: Pressure relief valve (PRV)

Scope

ISO 15500-12:2015 specifies tests and requirements for the pressure relief valve (PRV), a compressed natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833.

ISO 15500-12:2015 is applicable to vehicles using natural gas in accordance with ISO 15403-1 (mono-fuel, bi-fuel, or dual-fuel applications). It is not applicable to the following:

a) liquefied natural gas (LNG) fuel system components located upstream of, and including, the vaporizer;

b) fuel containers;

c) stationary gas engines;

d) container mounting hardware;

e) electronic fuel management;

f) refuelling receptacles.

NOTE 1 It is recognized that miscellaneous components not specifically covered herein can be examined to meet the criteria of this part of ISO 15500 and tested according to the appropriate functional tests.

NOTE 2 All references to pressure in this part of ISO 15500 are to be considered gauge pressures unless otherwise specified.

NOTE 3 This part of ISO 15500 is based upon a service pressure for natural gas as a fuel of 20 MPa [200 bar[1]] settled at 15 °C. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio). For example, a 25 MPa (250 bar) service pressure system will require pressures to be multiplied by 1,25.

[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

Adoption without modification
ISO 15500-12:2015
01 July 2021

Files

Arabic 7 Pages
Current Edition
22.85 BHD
English 5 Pages
Current Edition Reference Language
14.97 BHD
 

Related Standards

Updates
GSO ISO 15500-12:2014
ISO 15500-12:2001 
Historical
Gulf Standard
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 12: Pressure relief valve (PRV

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015 
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993 
Bahraini Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ISO 668:2022
ISO 668:2020 
Gulf Standard
Series 1 freight containers — Classification, dimensions and ratings
GSO ISO 7176-6:2022
ISO 7176-6:2018 
Gulf Standard
Wheelchairs — Part 6: Determination of maximum speed of electrically powered wheelchairs
GSO ISO 7240-4:2022
ISO 7240-4:2017 
Gulf Standard
Fire detection and alarm systems — Part 4: Power supply equipment
GSO ISO 3888-1:2022
ISO 3888-1:2018 
Gulf Standard
Passenger cars — Test track for a severe lane-change manoeuvre — Part 1: Double lane-change