GSO ISO 15156-3:2021

Gulf Standard   Historical
· Approved on 01 July 2021 ·

Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

GSO ISO 15156-3:2021 Files

English 85 Pages
Historical Reference Language

GSO ISO 15156-3:2021 Scope

ISO 15156-3:2015 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations.

ISO 15156-3:2015 addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC), and galvanically induced hydrogen stress cracking (GHSC).

ISO 15156-3:2015 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.

Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions.

ISO 15156-3:2015 applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 15156‑1:2015, Clause 5.

ISO 15156-3:2015 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

Best Sellers From Oil and Gas Sector

GSO 1785:2013
 
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines API Classifications
BH GSO 1785:2015
GSO 1785:2013 
Bahraini Technical Regulation
Lubricating Oils for Internal Combustion Engines API Classifications
GSO 1180:2021
 
Gulf Standard
Automatic transmission fluid (ATF)
BH GSO 1180:2022
GSO 1180:2021 
Bahraini Standard
Automatic transmission fluid (ATF)

Recently Published from Oil and Gas Sector

BH GSO ASTM D1945:2023
GSO ASTM D1945:2023 
Bahraini Standard
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
BH GSO ISO 29945:2023
GSO ISO 29945:2023 
Bahraini Standard
Refrigerated non-petroleum based liquefied gaseous fuels — Dimethylether (DME) — Method of manual sampling onshore terminals
BH GSO ISO 12925-3:2023
GSO ISO 12925-3:2023 
Bahraini Standard
Lubricants, industrial oils and related products (Class L) — Family C (gears) — Part 3: Specifications for greases for enclosed and open gear systems
BH GSO ISO 10715:2023
GSO ISO 10715:2023 
Bahraini Standard
Natural gas — Gas sampling