GSO ISO 15876-3:2021

Gulf Standard   Current Edition

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings

Scope

ISO 15876-3:2017 specifies the characteristics of fittings for polybutene-1 (PB-1) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems under design pressures and temperatures according to the class of application (see ISO 15876‑1).

The designation polybutene is used together with the abbreviation PB throughout this document.

ISO 15876-3:2017 covers a range of service conditions (application classes) and design pressure classes. For values of TD, Tmax and Tmal in excess of those in ISO 15876‑1:2016, Table 1, this document does not apply.

NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.

It also specifies the parameters for the test methods referred to in this document.

In conjunction with the other parts of ISO 15876, this document is applicable to fittings made from PB and to fittings made from other materials which are intended to be fitted to pipes conforming to ISO 15876‑2 for hot and cold water installations, whereby the joints conform to the requirements of ISO 15876‑5.

ISO 15876-3:2017 is applicable to fittings of the following types:

- socket fusion fittings;

- electrofusion fittings;

- mechanical fittings;

- fittings with incorporated inserts.

It is also applicable to fittings made from alternative materials which, when fitted to pipes conforming to ISO 15876‑2, conform to the requirements of ISO 15876‑5.

Adoption without modification
ISO 15876-3:2017
01 July 2021
Water supply systems
Including water meters in buildings

Files

 
 

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015 
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993 
Bahraini Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO EN 1176-7:2022
EN 1176-7:2020 
Gulf Standard
Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation
GSO EN 1176-5:2022
EN 1176-5:2019 
Gulf Standard
Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels
GSO ISO 5611-4:2021
ISO 5611-4:2015 
Gulf Standard
Cartridges, type A, for indexable inserts — Part 4: Style J
GSO ISO 5611-9:2021
ISO 5611-9:2015 
Gulf Standard
Cartridges, type A, for indexable inserts — Part 9: Style T