m GSO ISO 10360-10:2021 - Standards Store - Ministry of Industry, Commerce & Tourism - Kingdom of Bahrain

GSO ISO 10360-10:2021

Gulf Standard   Current Edition

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers for measuring point-to-point distances

Scope

ISO 10360-10:2016 specifies the acceptance tests for verifying the performance of a laser tracker by measuring calibrated test lengths, test spheres and flats according to the specifications of the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the laser tracker. The acceptance and reverification tests given in this part of ISO 10360 are applicable only to laser trackers utilizing a retro-reflector as a probing system. Laser trackers that use interferometry (IFM), absolute distance meter (ADM) measurement, or both can be verified using this part of ISO 10360. This part of ISO 10360 can also be used to specify and verify the relevant performance tests of other spherical coordinate measurement systems that use cooperative targets, such as "laser radar" systems.

NOTE Systems, such as laser radar systems, which do not track the target, will not be tested for probing performance.

ISO 10360-10:2016 does not explicitly apply to measuring systems that do not use a spherical coordinate system (i.e. two orthogonal rotary axes having a common intersection point with a third linear axis in the radial direction). However, the parties can apply this part of ISO 10360 to such systems by mutual agreement.

ISO 10360-10:2016 specifies

- performance requirements that can be assigned by the manufacturer or the user of the laser tracker,

- the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements,

- rules for proving conformance, and

- applications for which the acceptance and reverification tests can be used.

Adoption without modification
ISO 10360-10:2016
01 July 2021

Files

 
 

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO 1:1990
 
Gulf Standard
The international system of units Part 1: Quantities and base,supplementary and derived units.
GSO OIML R121:2007
OIML R 121:1996 
Gulf Standard
The Scale of Relative Humidity of Air Certified Against Saturated Salt Solutions
GSO OIML R76-1:2009
OIML R 76-1:2006 
Gulf Standard
Non-automatic weighing instruments – Part 1: Metrological and technical requirements - Tests

Recently Published from Metrology Sector

GSO ISO 13385-1:2022
ISO 13385-1:2019 
Gulf Standard
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of callipers
GSO ISO 80000-4:2022
ISO 80000-4:2019 
Gulf Standard
Quantities and units — Part 4: Mechanics
GSO ISO 80000-5:2022
ISO 80000-5:2019 
Gulf Standard
Quantities and units — Part 5: Thermodynamics
GSO ISO 20046:2022
ISO 20046:2019 
Gulf Standard
Radiological protection — Performance criteria for laboratories using Fluorescence In Situ Hybridization (FISH) translocation assay for assessment of exposure to ionizing radiation