GSO EN 520:2021

Gulf Standard Current Edition

Gypsum plasterboards- Definitions, requirements and test methods

Scope

This document specifies the characteristics and performance of gypsum plasterboards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. This document covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load), impact resistance and thermal resistance. The following performance characteristics are linked to systems assembled with plasterboards: shear strength, fire resistance, impact resistance, direct airborne sound insulation and acoustic absorption to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics. It provides for the evaluation of conformity of the product to this document. This document does not cover plasterboards, which have been subject to any secondary manufacturing operations (e.g. insulating composite panels, plasterboards with thin lamination, etc.).

Type

Adoption without modification

Adopted From

EN 520:2009

Approved on

01 July 2021

Sector

Construction and Building Sector

ICS - 01.040.91

Construction materials and building (Vocabularies)

ICS - 91.100.10

Cement. Gypsum. Lime. Mortar