GSO ASTM D7297:2021
Gulf Standard
Current Edition
·
Approved on
01 July 2021
·
Standard Practice for Evaluating Residential Indoor Air Quality Concerns
GSO ASTM D7297:2021 Files
English
28 Pages
Current Edition
Reference Language
GSO ASTM D7297:2021 Scope
1.1 This standard practice describes procedures for evaluating indoor air quality (IAQ) concerns in residential buildings.
1.2 The practice primarily addresses IAQ concerns encountered in single-family detached and attached (for example,
townhouse or duplex design) residential buildings. Limited
guidance is also included for low- and high-rise multifamily
dwellings.
1.3 The IAQ evaluation procedures are comprised of interviews with the homeowner or resident(s) (including telephone
interviews and face-to-face meetings) and on-site investigations (including walk-through, assessment, and measurements). For practicality in application, these procedures are
divided into three separate phases, which may occur over one
or more site visits.
1.4 The procedures described in this standard practice are
aimed at identifying potential causes contributing to the IAQ
concern. Such findings should become a basis for recommending corrective measures. This standard practice does not
describe problem resolution or corrective measures and the
standard is not intended to evaluate the impact of corrective
measures.
1.5 This practice describes a pathway for characterizing
indoor air, though adherence to this practice does not guarantee
that an investigator will be able to identify or resolve an IAQ
complaint for one or more of the following reasons: (1) the
diversity of sources and contaminants in indoor air; (2) other
factors that may affect occupant perception and acceptance of
indoor air quality, such as air temperature, humidity, noise,
lighting, and psychological stress; (3) the range of susceptibility in the population.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 440:2007
Gulf Standard
Calcium Silicate bricks
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Construction and Building Sector
GSO ASTM E2129:2024
ASTM E2129:18
Gulf Standard
Standard Practice for Data Collection for Sustainability Assessment of Building Products
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO EN 196-3:2024
EN 196-3:2016
Gulf Standard
Methods of testing cement - Part 3: Determination of setting times and soundness
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ISO 10563:2024
ISO 10563:2023
Gulf Standard
Building and civil engineering sealants — Determination of change in mass and volume
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO EN 933-2:2024
EN 933-2:2020
Gulf Standard
Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)